Samsung LN40C630 User Manual - Page 14

Adjusting, picture settings, Backlight, Contrast, Brightness, Sharpness, Color, ECO Solution, - best picture settings

Page 14 highlights

Basic Features Adjusting picture settings [_ MENU ITR_ Picture _ BackJight _ EN°[ERC_ Setting up the TV with your PC Set the input source to PC. Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R) Your tebvision has several setting options for pbture quality control. NOTE o When you make changes to Backlight, Contrast, Brightness, Sharpness, Color or Tint (G/R) the OSD will be adjusted accordingly. o In PC mode, you can only make changes to Backlight, Contrast and Brightness. o Settings can be adjusted and stored for each external device connected to the TM o Lowering picture brightness reduces power consumption. EconomicalSolutions ECO Solution [_ MENU FITI_ Picture _ ECO Solution _ ENTER _ [] Energy Saving (Off / Low / Medium / High / Picture Off / Auto): This adjust the brightness of the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button to turn on the screen again. [] Eco Sensor (Off / On): To enhance your power savings; the picture settings will automatically adapt to the light in the room. If you adjust the Backlight, the Eco Sensor will be set to Off. Min Backlight: When ECO sensor is On, the minimum screen brightness can be adjusted manually. If Eco Sensor is On, the display brightness may change (become slightly darker in most cases) depending on the surrounding light intensity. [] No Signal Power Off (Off / 15 min. / 30 min. / 60 min.) Sets how quickly the TV switches to standby mode, if no picture is being received. Disabled when the PC is in power saving mode. Auto Adjustment ÷ ..... [_ MENU ms _ Picture _ Auto Adjustment ENTER _ Adjust frequency values/positions and fine tune the settings automatically. Not available when connecting through HDMI/DVI cable. Screen [] Coarse / Fine: Removes or reduces pbture noise. If the noise is not removed by Rne-tuning alone, then adjust the frequency as best as possible (Coarse) and Finetune again. After the noise has been reduced, readjust the picture so that it is aligned to the center of screen. [] Position: Adjust the PC's screen positioning if it does not fit the TV screen. Press the a, or _' button to adjust the Vertical-Position. Press the _11or _ button to adjust the HorizontaPPosition. [] mmageReset: Resets the image to default settings. Using Your TV as a Computer (PC) Display Setting Up Your PC Software (Based on Windows XP) Depending on the version of Windows and the video card, the actual screens on your PC win probably look different, but the same basic set-up information will apply in most cases. (If not, contact your computer manufacturer or Samsung Dealer) 1. Click on Control Paner' on the Windows start menu 2. Click on Appearance and Themes" in the "Control Paner' window and a display dialog-box will appear 3. Click on Display" and a display dialog box will appear 4. Navigate to the Settings" tab on the display dialog-box. • The correct size setting (resolution) [Optimum: 1920 X 1080 pixels] • If a verticaPfrequency option exists on your display settings dialog box, the correct value is '60' or '60 Hz'. Otherwise, just dick 'OK' and exit the dialog box 4 English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53

Basic Features
Adjusting
picture settings
[_
MENU ITR_
Picture
_
BackJight _
EN°[ERC_
Backlight
/
Contrast
/
Brightness
/
Sharpness
/
Color
/
Tint
(G/R)
Your tebvision has several setting options for pbture quality
control.
NOTE
o When you make changes to Backlight,
Contrast,
Brightness,
Sharpness,
Color
or Tint (G/R) the
OSD will be adjusted accordingly.
o In PC mode, you can only make changes to
Backlight,
Contrast
and Brightness.
o Settings can be adjusted and stored for each
external device connected
to the TM
o Lowering picture brightness reduces power
consumption.
EconomicalSolutions
ECO Solution
[_
MENU FITI_
Picture
_
ECO Solution
_
ENTER _
[]
Energy Saving (Off
/
Low
/
Medium
/
High
/
Picture
Off
/
Auto): This adjust the brightness of the TV in order
to reduce power consumption.
If you select Picture
Off, the screen is turned off, but the sound remains on.
Press any button to turn on the screen again.
[]
Eco Sensor (Off
/
On): To enhance your power savings;
the picture settings will automatically adapt to the light
in the room.
If you adjust the Backlight,
the Eco Sensor
will
be set to Off.
Min Backlight:
When ECO sensor is On, the minimum
screen brightness can be adjusted manually.
If Eco Sensor is On, the display brightness may
change (become slightly darker in most cases)
depending
on the surrounding light intensity.
[]
No Signal Power
Off (Off
/
15 min.
/
30 min.
/
60 min.)
Sets how quickly the TV switches to standby mode, if no
picture is being received.
Disabled when the PC is in power saving mode.
Setting
up the TV with your PC
Set the input source to PC.
Auto Adjustment
÷
.....
[_
MENU ms _
Picture
_
Auto Adjustment
ENTER _
Adjust frequency values/positions and fine tune the settings
automatically.
Not available when connecting
through
HDMI/DVI
cable.
Screen
[]
Coarse
/
Fine: Removes or reduces pbture
noise. If the
noise is not removed by Rne-tuning alone, then adjust
the frequency as best as possible (Coarse) and Fine-
tune again. After the noise has been reduced, readjust
the picture so that it is aligned to the center of screen.
[]
Position:
Adjust the PC's screen positioning if it does
not fit the TV screen. Press the a, or _' button to adjust
the Vertical-Position. Pressthe _11or _
button to adjust
the HorizontaPPosition.
[]
mmageReset: Resets the image to default settings.
Using Your TV as a Computer
(PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,
the actual screens on your PC win probably look different, but
the same basic set-up information will apply in most cases.
(If not, contact your computer manufacturer or Samsung
Dealer)
1.
Click on Control
Paner' on the Windows start menu
2.
Click on Appearance
and Themes" in the
"Control
Paner' window and a display dialog-box will appear
3.
Click on Display"
and a display dialog box will appear
4.
Navigate to the Settings"
tab on the display dialog-box.
The correct size setting (resolution)
[Optimum: 1920 X 1080 pixels]
If a verticaPfrequency option exists on your display
settings dialog box, the correct value is '60' or '60 Hz'.
Otherwise, just dick 'OK' and exit the dialog box
4
English