Samsung NQ70M6650DS/AA User Manual - Page 65
English 65, Symptom, Possible cause, Solution, See the on self
View all Samsung NQ70M6650DS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Symptom Food does not broil properly. The oven temperature is too hot or too cold. There is water dripping. There is steam coming through the crack between the oven body and the door. Water is remaining in the oven. Possible cause Solution The serving size may not be appropriate. Refer to the broiling recommendation guide for serving sizes on page 43, and then try again. The rack has not been properly positioned. See the broiling recommendation guide on page 43. The cookware is not suited for Use suitable cookware. broiling. In some areas, the power (voltage) may be low. • Preheat the broil element for 10 minutes. • See the broiling recommendation guide on page 43. The oven temperature needs to be adjusted. See the section on adjusting the temperature on page 48. You may see water or steam in some cases depending on the food you are cooking. This is not a product malfunction. Let the oven cool and then wipe with a dry dish towel. Symptom Possible cause I can hear water boiling during steam cooking. Water is being heated by the steam heater. The oven will not self-clean. The oven temperature is too high to start a self-clean operation. The oven controls have been set incorrectly. A self-cleaning cycle cannot be started if the oven lockout feature has been activated. Excessive smoking during a self-cleaning cycle. There is excessive soiling in the oven. The oven door will not open after a selfcleaning cycle. The oven is too hot. The oven is not clean after a self-cleaning cycle. The oven controls were not set correctly. The oven was heavily soiled. Solution This is not a product malfunction. Allow the oven to cool and then reset the controls. See the section on selfcleaning on page 51. Deactivate the oven lockout (see page 25). Touch OVEN OFF. Open the windows to rid the room of smoke. Wait until the selfcleaning cycle is cancelled. Wipe up the excessive soil and then start the selfcleaning cycle again. Allow the oven to cool. See the section on selfcleaning on page 51. Wipe up heavy spillovers before starting the selfcleaning cycle. Heavily soiled ovens may need to be selfcleaned again or for a longer period of time. English 65 Troubleshooting NQ70M6650DS_AA_DE68-04446A-02_EN+MES+CFR.indb 65 2018-08-30 12:52:39