Samsung PL50A450P1 User Manual (user Manual) (ver.1.0) (English, Spanish) - Page 16

Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. ➢ It may take a while before you see a full picture. Plug & Play Feature When the TV is initially powered On, basic settings proceed automatically and subsequently: 1 If the television is in standby mode, press the POWER button on the remote control. The message Start Plug & Play. is displayed. Press the ENTER button. Language menu is displayed. 2 Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTER button. The message Select 'Home Use' when installing this TV in your home. is displayed. Plug & Play Start Plug & Play. OK Enter Language Plug & Play English Français Español Português Move Enter 3 Press the ◄ or ► button to select Store Demo or Home Use, then press the ENTER button. ➢  The default selection is Home Use.  We recommend setting the TV to Home Use mode for the best picture in your home environment.  Store Demo mode is only intended for use in retail environments.  If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the Volume button. When the volume OSD is displayed, press and hold the MENU button for 5 seconds. Plug & Play Select 'Home Use' when installing this TV in your home. Store Demo Move Enter Home Use 4 The message Check antenna input. is displayed with OK selected. Press the ENTER button. 5 Press the ▲ or ▼ button to select Air, STD, HRC, or IRC, then press the ENTER button. Plug & Play Check antenna input. OK Enter Skip Air/Cable Plug & Play Air STD HRC IRC Move Enter Skip Continued... English - 16