Samsung SHR-8162 User Manual - Page 67

PLAYBACK Play You can play data stored in the HDD and backup a desired portion of the data. Using the mouse may help easy setup. 1. In Live mode, click in the right-click menu or < > in the launcher menu, or press the Play button on the remote control or the front panel. 2. Use the up/down button (▲▼) to select a menu.  For data search, refer to . (Page 64) Scene Mode SPOT OUT Audio Off Freeze Stop Alarm Record Play Search Backup Main Menu Shutdown Launcher hide Logout PTZ Alarm Freeze

SEARCH & PLAY 3. Select a data item and click in the Search menu. The selected data is played and the play launcher appears on the screen.  If there is an existing data, will start immediately without performing the search. • : You can play up to 4 channels in real time. - In a split mode, the real time playback may not be supported, depending on the record quality, resolution and number of channels. And some frame rates may be 3&$ supported. • Playback Information : Displays the date and time of the current data in the top corner. • Mode Switch : Select a desired play mode or press the [MODE] button to switch the mode in the sequence of 1-split, 4-split, 9-split, 16-split and 13-split.  The grey area in the center of the 13-split mode plays the Live channel. The default channel of the Live mode is CH1, which can be changed later. • : Switches to Live mode. • REC : Records all channels in Live mode. • Play Time : Displays the time and date of the current video. • Play Bar : Displays the time of recorded data in the selected channel for the past 24 hours; the red gridline indicates the current play time. M  Speed : Supports various speed options of x1, x2(-2), x4(-4), x8(-8), x16(-16), x32(-32) and x64(-64).  Slow : Supports slow speed options of x1/2(-1/2), x1/4(-1/4) and x1/8(-1/8). • Backup : Click < > to set the current time to the start time of backup; you can specify a backup area using the mouse (yellow triangle). Click < > again to set the current time to the end time of the backup and the "Backup Range" window appears. - Format: Supports formats of DVR, AVI and SEC. Refer to a list of formats in "Setting the Backup". (Page 54) - Device: Select a backup device. - Check Capacity : Enables you to check the capacity of the selected storage device. 4. If you want to return to the Live screen in Play mode, click < [] button on the remote control or the front panel. Backup Range Start 2009-01-01 00:01:06 Device None Folder \20090101\ Check capacity Backup End 2009-01-01 08:25:45 Format DVR Filename 0001 Backup Used Free Change Cancel > in the launcher menu or press the English _67