Samsung SL-M5370LX User Manual Ver.1.0 (English) - Page 240
Fuser Unit Failure: [error
View all Samsung SL-M5370LX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
Understanding display messages Message Meaning Suggested solutions Finisher Failure [error number]. Turn off then on, after checking finisher There is a problem in the finisher. Turn the machine off and back on again. If the problem persists, call for service. Finisher top door is open. The finisher top door is Close the top door until it Close it not securely latched. locks into place. Fuser Failure: [error number]. Turn off then on There is a problem in the fuser unit. Fuser Unit Failure: [error number]. Turn off then on. Call for service if the problem persists Turn the machine off and back on again. If the problem persists, call for service. HCF [number] cassette is The HCF is not securely Close the HCF until it locks pulled out. Insert it latched. into place. properly HCF [number] door is open. Close it The HCF door is not securely latched. Close the HCF door until it locks into place. HCF [number] is not installed. Install the tray The HCF is not properly Reinstall the HCF. If the installed. problem persists, call for service. Message Meaning Suggested solutions HDD System Failure [error number] : Turn off then on. Call for service if the problem persists There is a problem in the hard disk. Turn the machine off and back on again. If the problem persists, call for service. HDD System Failure [error number] : Call for service HDD Error [error number]. Check users guide Imaging Unit Failure: [error number]. Install imaging unit again The imaging unit is not installed. Install the imaging unit. If it is already installed, try to reinstall the imaging unit. If the problem persists, call for service. Imaging unit Failure: [error number]. Call for service There is a problem in the imaging unit. Turn the machine off and back on again. If the problem persists, call for service. Imaging unit Failure: [error number]. Please turn off then on There is a problem in the imaging unit. Turn the machine off and back on again. If the problem persists, call for service. 9. Troubleshooting 240