Samsung SL-M5370LX User Manual Ver.1.0 (English) - Page 48

Loading originals 2 In the Dual scan document feeder (DSDF) 1 Flex or fan the edge of the paper stack to separate the pages before loading originals. Preparing originals • Do not load paper smaller than 105 x 148 (4.13 x 5.85 inches) or larger than 216 x 356 mm (8.5 x 14 inches). • Do not attempt to load the following types of paper, in order to prevent paper jam, low print quality, and machine damage. - Carbon-paper or carbon-backed paper - Coated paper - Onion skin or thin paper - Wrinkled or creased paper - Curled or rolled paper - Torn paper • Remove all staples and paper clips before loading. • Make sure any glue, ink, or correction fluid on the paper is completely dry before loading. • Do not load booklets, pamphlets, transparencies, or documents with other unusual characteristics. Using the DSDF, you can load up to 100 sheets of paper (80 g/m2, 20 lb bond) for one job. 2 Load the originals face up into the DSDF. Make sure that the bottom of the original stack matches the paper size marked on the document input tray. 2. Media and tray 48