Samsung VR330 Instruction Manual - Page 28

Connections Setting the Remote Control You can control part of another manufacturer's TV functions with this remote control. • Buttons that can be controlled on your TV : TV POWER, INPUT SEL., VOL +/-, CH/TRK ( / ), TV MUTE, 0~9, 100+. To determine whether your television is compatible, follow the instructions below. 1. Switch your television on. 2. Point the remote control towards the television. 3. Press and hold the TV button and enter the two-figure code simultaneously corresponding to the brand of your television by pressing the appropriate number buttons. Brand Codes SAMSUNG 01,14,15,23,31 DAEWOO 19 EMERSON 21 GRADIENTE 30 HITACHI 10 JVC 11 LG 06,08,18 LOEWE 28 MAGNAVOX 04 MITSUBISHI 13 Brand Codes NEWSAN 27 NOBLEX 25 PANASONIC 12,24 RCA 07,29 SANYO 05,20 SHARP 02,16,22 SONY 03 TELEFUNKEN 26 TOSHIBA 09 ZENITH 17 Result: If your television is compatible with the remote control, it will switch off. It is now programmed to operate with the remote control. I If several codes are indicated for your Note television brand, try each one in turn until you find one that works. If you replace the remote control's batteries, you must set the brand code again. You can then control the television using the following buttons. Button Function TV POWER Used to switch the television on and off. INPUT SEL. Used to select an external source. VOL +/- Used to adjust the volume of the television. CH/TRK ( / ) Used to select the desired channel. TV MUTE Used to toggle the sound on and off. 0~9 Used to input number directly. 100+ Used to select channels over 100. The various functions may be able to be Note controlled on all televisions. If you encounter problems, operate the television directly. 28 - English