Samsung VR330 Instruction Manual - Page 50

Using the Markers Playing back a Marker 1 Press the MARKER button during playback. (VR mode) 1 Press the MARKER button during playback. Marker N : 0 2 Press the œ √ buttons to select a marked scene. Marker 01 02 N : 2 MOVE PLAY CANCEL RETURN SELECT RETURN 2 Press the ENTER button when the desired scene appears. Marker 01 N : 1 3 Press the ENTER or √ll button to start playing from the selected scene. • If you press the NEXT SKIP (√√l )button or the PREVIOUS SKIP(lœœ)button in marker mode, and the next or current marked point plays for shorter than three seconds, playback starts from the previous marked point. MOVE PLAY CANCEL RETURN • The number 01 is displayed and the scene is memorized. 3 Press the œ √ button to move to the next position. 4 Press the ENTER button again when the desired scene appears. Marker 01 02 N : 2 Clearing a Marker 1 Press the MARKER button during playback. 2 Press the œ √ buttons to select a marked scene. Press the CANCEL button to delete the selected mark. Marker 01 02 03 04 05 06 07 08 09 10 √ N : 10 Marker 01 02 03 04 05 06 07 08 09 -- N : 9 Playback MOVE PLAY CANCEL RETURN • The number 02 is displayed and the scene is memorized. • DVD-RAM or DVD-RW (VR Mode) discs have the Marker function instead of the Bookmark function. The Marker function allows you to mark up to 99 scenes. Since the scenes may be displayed as many different pages, numbering is necessary. If a disc in use is encoded with Disc Protect, Markers cannot be set or deleted. Only playback is available. 50 - English MOVE PLAY CANCEL RETURN • When a marker is cleared while DVD-RAM/ DVD-RW(VR mode) is playing, marker numbers will change. For example, if the 7th marker is cleared after ten markers are registered, the marker numbers after the eighth will automatically move ahead by one and the 8th marker becomes the 7th.