Samsung VR330 Instruction Manual - Page 36

System Setup Setting Up the Display(Video) Options This function allows you to setup the TV screen settings. 1 With the unit in Stop mode/No Disc mode, press the MENU button. 2 Press the ...† buttons to select Setup, then press the ENTER or √ button. DVD-Recorder No Disc Timer Rec. Setup System Clock Set Channel Set Language Audio Video Parental Control MOVE ENTER RETURN Setup EXIT 3 Press the ...† buttons to select Video, then press the ENTER or √ button. Video option menu will be displayed. DVD-Recorder Video No Disc Timer Rec. TV Aspect : 16:9 Wide √ Setup Input Level : Darker √ Black Level : 7.5 IRE √ 3D Noise Reduction : Off √ MOVE ENTER RETURN EXIT 4 Press the ...† buttons to select the desired video option, then press the ENTER or √ button. 5 Press the ...† buttons to select the desired item, then press the ENTER or √ button. Press the RETURN or œ button to return to the Note previous menu. Press the MENU button to exit the menu. 36 - English TV Aspect Depending on the type of television you have, you may want to adjust the screen setting. (aspect ratio) • 4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen. • 4:3 Pan & Scan : Select this for a conventional size TV when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.) • 16:9 Wide : You can view the full 16:9 picture on your wide-screen TV. Input Level Adjusts the level of the input signal. • Darker : If you feel the screen is too light and you want to make the screen darker. • Lighter : If you feel the screen is too dark and you want to make the screen lighter. Black Level Adjusts the black level of the screen. • 7.5 IRE : This will enhance the black level for increased brightness/contrast when viewing DVDs. Select this when you want to make the screen lighter. • 0 IRE : This is the standard NTSC reference black level for consistent brightness/contrast across all sources. Select this when you want to make the screen darker. 3D Noise Reduction • Off : Normal • On : Select to remove noise from the screen. This function depends on disc type. It may not Note work for some disc types. IRE: Short for the Institute of Radio Engineers. An IRE unit is a relative unit of measure equaling 1/140th of the peak-to peak (p-p) video amplitude.