Samsung VR330 Instruction Manual - Page 92
Troubleshooting (DVD - dvd problems
UPC - 036725603325
View all Samsung VR330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Troubleshooting (DVD) Problem Explanation/Solution icon appears on the screen. Play mode settings are different from the settings configured with the Setting menu. You cannot use the operation or function due to one of the following reasons: (1) Your DVD disc does not support the feature (for example, angles) (2) You've requested a title, chapter, or scan time that is out of the correct range. The disc does not support all the selected functions. In this case, some settings you configure on the Setting menu may not work properly. Cannot change the aspect ratio. Aspect ratio is fixed for DVD disc. No audio output. Check whether you selected correct digital output options in the Audio Output Options menu. No video or audio output. The disc tray is ejected after 2 to 5 seconds. Did you move your DVD Recorder & VCR suddenly from a cold place to a warm place? In this case, do not connect the plug to the power outlet and wait for two hours. Then insert the disc and try to play back again. It will work properly when condensation has evaporated. Angle operation does not work during playback of a DVD disc. The disc revolves, but no image or bad quality images are output. Angle operation is available only when the disc contains images captured at different angles. • Check whether there is damage or foreign materials on your disc. • Some discs with bad manufacturing quality may not be played back. • If the scene changes from dark to bright suddenly, the screen may jitter temporarily, but it is not a defect. Desired sound language and subtitle language are not played. No progressive output. Sound languages and subtitle languages are disc-specific. Only the sound and subtitle languages contained on a DVD disc are available and displayed on the disc menu. • Check whether PS is displayed on front panel. • Make sure to change the component video output using the Progressive button when the disc is stopped. The remote control doesn't work. • Point the remote control at the remote control sensor on your DVD Recorder & VCR. Operate within distance. (15ft) Remove obstacles between your DVD Recorder & VCR and remote control. • Check whether the batteries are depleted. Other problems • Read the table of contents and then find and read the sections describing your problem, and follow the directions given. • Turn the unit off and on. • If your problem still persists, contact your nearest Samsung service center. 92 - English Reference