Samsung WF457ARGSGR/A2 User Manual Ver.1.0 (English, French, Spanish) - Page 35

02 WASHING A LOAD OF LAUNDRY Using the My Cycle function The My Cycle function allows you to activate a custom wash (temperature, spin, soil level, and extra cycles) with a single button. You can save up to 3 My Cycles. Saving a My Cycle Follow the steps below to save your favourite custom wash as a My Cycle. 1. Tap the My Cycle button on the left side of the Cycle Selection screen. The selection expands showing three None buttons (None1 through None3) on the left of the screen. Refer to the illustration on the right. 2. Select a cycle and its options, such as the temperature, spin speed, soil level and extra cycles, in the Cycle Selection screen. In this example, we selected the Normal cycle, set the temperature to Warm, the spin speed to High, the soil level to Normal, and selected Extra Rinse and Steam as the extra cycles to add. See the "Cycle chart" section on page 66 for the available settings for each cycle. 3. Tap the Save As My Cycles button located at the right center of the Cycle Selection screen. 4. Select the My Cycle button you want to overwrite with the selected cycle and its options. In this example, we selected My Cycle 1: None. When done, tap the Next button. 5. The Name your My Cycle screen appears. Enter a name for the My Cycle. In this example, we entered "J's Wash". When done, tap the Save button. 6. A summary of the My Cycle that will overwrite the existing cycle is displayed, as shown in the figure on the right . Tap the OK button. WF457ARG-03153A-04_EN.indd 35 Washing a load of laundry _35 2012-08-31 12:30:25