Sanyo WF10 Instruction Manual, PLV-WF10 - Page 42
Lamp counter reset, Factory default
UPC - 086483050046
View all Sanyo WF10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
SETTING Lamp counter reset Be sure to reset Lamp Counter when Lamp Assembly is replaced. When Lamp Replace Counter is reset, LAMP REPLACE indicator stops lighting. 1 Turn projector on, press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to SETTING Menu icon. 2 Press POINT DOWN button to move a red frame pointer to "Lamp counter reset" and then press SELECT button. 3 Move arrow to replaced lamp number (Lamp 1 or Lamp 2) and then press SELECT button. Message "Lamp replace counter Reset?" is displayed. Move pointer to [Yes] and then press SELECT button. NOTE: Be sure to reset correct lamp number otherwise LAMP REPLACE indicator continues lighting. 4 Another confirmation dialog box appears and select [Yes] to reset Lamp Replace Counter. Do not reset Lamp Replace Counter except after Projection lamp is replaced. Move pointer to Lamp counter reset and then press SELECT button. 1 2 Move arrow to replaced lamp number (Lamp 1 or Lamp 2) and then press SELECT button. Factory default This function returns all setting values except for the lamp counter to the factory default settings. Press POINT UP/DOWN button to move a red frame pointer to "Factory default" and then press SELECT button. The message "Return to Factory default?" is displayed. Move the pointer to [Yes] and then press SELECT button. Another confirmation dialog box appears and select [Yes] and then press SELECT button. Return the projector to Factory default. 12 Message "Lamp replace counter Reset?" is displayed. Move pointer to [Yes] and then press SELECT button. Factory default Quit Closes SETTING MENU. 42