Sanyo WXU300 Instruction Manuals, PLC-WXU300 - Page 50
Ceiling, HDMI setup, Image, Normal, Standard, Enhanced, Sound, Terminal, Monitor out, Computer, Video
UPC - 086483074226
View all Sanyo WXU300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Setting Ceiling When this function is set to On, the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the screen. Ceiling Rear HDMI setup This function is only used for HDMI input source. Image Normal: When the output of Digital R/G/B equipment is set to Standard. Enhanced: When the output of Digital R/G/B equipment is set to Enhanced. Sound HDMI When Digital input source is input Sound is set to HDMI. Computer 2: When DVI input source is changed to HDMI input source, Sound is set to Computer 2. The names for the output setting of Digital R/G/B vary from equipment to equipment. For details, refer to the owner's manual of your Digital R/G/B equipment. When the black parts of the image are destroyed or stand out, please switch to Normal or Enhanced, and then switch the output type of the HDMI Digital R/G/B output equipment. HDMI setup Picture in Picture Standby mode Network Terminal The COMPUTER IN 2/MONITOR OUT terminal on the back of the projector is switchable for Computer 2 input or monitor output. (See page 9) Computer 2 . . . Computer input Monitor out . . . Monitor out Terminal function is not available when selecting Computer 2 to the input source. Change the input source to the others (HDMI or Computer 1 or Video) so that the Terminal function will be available. (pp.27-28, 37-38) 50