Schwinn 460 Elliptical Assembly Manual - Page 12
Step 6, Attach the Cam Assembly to the, Main Assembly - machine
View all Schwinn 460 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Assembly Note: R ead and understand Steps 6 thru 8 before starting the assembly process for these sections. Perform steps 6 through 8 on one side of the machine and then repeat on opposite side. Step 6: Attach the Cam Assembly to the Main Assembly Parts • Main Assembly from Step 5 • #8 - Left Cam Assembly • #9 - Right Cam Assembly Note: T his step requires two people. 6-1 R otate the Crank Arm until the roller (R) is at its lowest position (Figure 6a). 6-2 S et the Cam Assembly on the Crank Arm roller (R) as shown in Figure 6b. There is a track on the Cam Assembly that sits on the Crank Arm roller. Note: Make sure that the roller aligns correctly in the track. R Figure 6a 9 8 R Figure 6b 10 Assembly Manual
Assembly Manual
10
Step 6:
Attach the Cam Assembly to the
Main Assembly
Parts
• Main Assembly from Step 5
• #8 - Left Cam
Assembly
• #9 - Right Cam
Assembly
Note:
This step requires two people.
6-1
Rotate the Crank Arm until the roller (R) is at its lowest
position (Figure 6a).
6-2
Set the Cam Assembly on the Crank Arm roller (R) as shown
in Figure 6b. There is a track on the Cam Assembly that sits on
the Crank Arm roller.
Note:
Make sure that the roller aligns correctly in the track.
Assembly
R
8
9
R
Figure 6a
Figure 6b
Note:
Read and understand Steps 6 thru 8 before starting the assembly process for these sections.
Perform steps 6 through 8 on one side of the machine and then repeat on opposite side.