Schwinn 460 Elliptical Assembly Manual - Page 17
Troubleshooting, Final Inspection - machines
View all Schwinn 460 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Assembly Final Inspection Inspect your machine to ensure that all fasteners are tight, the machine is level and components are properly assembled. Failure to visually check and test assembly before use can cause damage to the equipment. It can also cause serious injury to users and bystanders. Troubleshooting Problem Unit rocks/does not sit level Check Leveler adjustment on front stabilizer Surface under unit Foot pedals loose/unit difficult Hardware to pedal Solution Level the machine by turning the feet in or out. Move machine to level area if adjustments do not compensate for unlevel surfaces. Tightly secure all hardware on pedal arm, sub pedal arm, and handlebars. 15 Assembly Manual
Assembly Manual
15
Assembly
Problem
Check
Solution
Unit rocks/does not sit level
Leveler adjustment on front
stabilizer
Level the machine by turning the feet in or out.
Surface under unit
Move machine to level area if adjustments do not
compensate for unlevel surfaces.
Foot pedals loose/unit difficult
to pedal
Hardware
Tightly secure all hardware on pedal arm, sub
pedal arm, and handlebars.
Troubleshooting
Final Inspection
Inspect your machine to ensure that all fasteners are tight, the machine is level and components are properly assembled.
Failure to visually check and test assembly before use can cause damage to the equipment. It can also cause
serious injury to users and bystanders.