Schwinn 460 Elliptical Assembly Manual - Page 6
Assembly
View all Schwinn 460 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Step 1: Rear Stabilizer Parts • #1 - Main Assembly (Qty 1) • #2 - Rear Stabilizer (Qty 1) Hardware • #24 - M8 x 20 Button Head Bolt (Qty 2) • #27 - M8 Spring Lock Washer (Qty 2) • #28 - M8 Flat Washer (Qty 2) Tools • 6mm Hex Key Assembly Note: This step requires two people. 1-1 Have one person lift the rear of the Main Assembly. 1-2 Move the Rear Stabilizer under the Main Assembly with the handle facing out and the bolt holes up. 1-3 Align the bolt holes. 1-4 Attach the Rear Stabilizer to the Main Assembly with the hardware shown. 1-5 Tighten hardware. 24 27 28 1 2 Figure 1 4 Assembly Manual
Assembly Manual
4
1
24
27
28
2
Figure 1
Assembly
Step 1: Rear Stabilizer
Parts
• #1 - Main Assembly (Qty 1)
• #2 - Rear Stabilizer (Qty 1)
Hardware
• #24 - M8 x 20 Button Head Bolt (Qty 2)
• #27 - M8 Spring Lock Washer (Qty 2)
• #28 - M8 Flat Washer (Qty 2)
Tools
• 6mm Hex Key
Note:
This step requires two people.
1-1
Have one person lift the rear of the Main Assembly.
1-2
Move the Rear Stabilizer under the Main Assembly
with the handle facing out and the bolt holes up.
1-3
Align the bolt holes.
1-4
Attach the Rear Stabilizer to the Main Assembly with
the hardware shown.
1-5
Tighten hardware.