Schwinn 460 Elliptical Assembly Manual - Page 8
Step 3, Console Mast
View all Schwinn 460 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Step 3: Console Mast Parts • Assembly from Step 2 • #7 - Console Mast (Qty 1) Hardware • #24 - M8 x 20 Button Head Bolt (Qty 4) • #27 - M8 Spring Lock Washer (Qty 4) • #28 - M8 Flat Washer (Qty 4) Tools • 6mm Hex Key Assembly Note: This step requires two people. 3-1 Have one person hold the Console Mast in place while the other person connects the Main Console wire (W1) to the the Main Assembly wire (W2). 3-2 Set the Console Mast on the Main Assembly and line up the bolt holes. NOTICE: Do not pinch the wires when putting the Console Mast on the Main Unit. 3-3 Attach the Console Mast to the Main Assembly with the hardware shown. 3-4 Tighten the hardware. 7 24 27 28 W1 W2 Figure 3 6 Assembly Manual
Assembly Manual
6
Step 3:
Console Mast
Parts
• Assembly from Step 2
• #7 - Console Mast (Qty 1
)
Hardware
• #24 - M8 x 20 Button Head Bolt (Qty 4)
• #27 - M8 Spring Lock Washer (Qty 4)
• #28 - M8 Flat Washer (Qty 4)
Tools
• 6mm Hex Key
7
24
27
28
W1
W2
Figure 3
Assembly
Note:
This step requires two people.
3-1
Have one person hold the Console Mast in place
while the other person connects the Main Console
wire (W1) to the the Main Assembly wire (W2).
3-2
Set the Console Mast
on the Main Assembly and
line up the bolt
holes.
NOTICE:
Do not pinch the wires when putting the
Console Mast on the Main Unit.
3-3
Attach the Console Mast to the Main Assembly with
the hardware shown.
3-4
Tighten the hardware.