Schwinn 460 Elliptical Assembly Manual - Page 15
Step 9, Attach the Console and Fan to, the Mast
View all Schwinn 460 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Assembly Step 9: Attach the Console and Fan to the Mast Parts • Main Assembly from Step 8 • #13 - Console with Fan (Qty 1) Hardware • #23 - M5 x 15 Phillips Head Screw (Qty 4) Tools • Phillips Screwdriver Note: This step requires two people. 9-1 Hold the Console above the Mast plate and connect the Main Console wire (W1) to the Console wire (W3). 9-2 Tuck the wire connectors into the Console Mast. NOTICE: Do not pinch the wires when putting the Console on the Console Mast. 9-3 Attach the Console to the Mast with the hardware shown. W3 W1 23 Figure 9 13 Assembly Manual
Assembly Manual
13
Assembly
Step 9:
Attach the Console and Fan to
the Mast
Parts
• Main Assembly from Step 8
• #13 - Console with Fan (Qty 1)
Hardware
• #23 - M5 x 15 Phillips Head Screw (Qty 4)
Tools
• Phillips Screwdriver
W3
W1
23
Figure 9
Note:
This step requires two people.
9-1
Hold the Console above the Mast plate and connect
the Main Console wire (W1) to the Console wire (W3).
9-2
Tuck the wire connectors into the Console Mast.
NOTICE:
Do not pinch the wires when putting the
Console on the Console Mast.
9-3
Attach the Console to the Mast with the hardware
shown.