Schwinn 460 Elliptical Assembly Manual - Page 13

Assembly Step 7: Attach the Square Pedal Arms to the Swing Arms Parts • Main Assembly from Step 6 Hardware • #30 - M10 Spring Lock Washer (Qty 2) • #31 - M10 Wide Flat Washer (Qty 4 • #32 - M10 Hex Lock Nut (Qty 2) • #34 - M10 x 85 Button Head Bolt (Qty 2) Tools • 6mm Hex Key • C ombination Wrench (or 17mm socket wrench not included) 7-1 Slide the front end of the Square Pedal Arm (A1) into the Swing Arm bracket. 7-2 A lign the Square Pedal Arm with the top holes (H1) of the Swing Arm. 7-3 A ttach the Pedal Arm to the Swing Arm with one M10 x 85 Button Head Bolt, two M10 Wide Flat Washers, one M10 Spring Lock Washer and one M10 Hex Lock Nut. 7-4 Hand tighten hardware. Note: Do not tighten hardware at this time. 32 31 H1 31 30 34 A1 Figure 7 11 Assembly Manual