Sharp ER-A450T Dealer Knowledge Book - Page 4

Introduction CABLE SPECIFICATIONS The below diagram represents the cable specifications required when connecting the ER-A450T to a PC when the Logo Image Data function is used. 1. Specifications: (1) Cable: Shielded, twisted pair (2) Connector: D-Sub 9 pin (female type) connector (3) Baud Rates: 38400, 19200, 9600, 4800, 2400, 1200 2. Pin Outs: ER-A450T to a PC (9 pin D-Sub): Please refer to (fig. 1) below for the connection pin out diagram. 9PIN D-SUB ER-A450T SD 3 9PIN D-SUB ER-A450T or PC 3 SD RD 2 RTS 7 2 RD 7 RTS DCD 1 1 DCD DTR 4 4 DTR DSR 6 6 DSR CTS 8 8 CTS SG 5 SD : TRANSMITTED DATA RD : RECEIVED DATA DTR: DATA TERMINAL READY DSR: DATA SET READY RTS: REQUEST TO SEND DCD: DATA CARRIER DETECTOR CTS: CLEAR TO SEND (FIG.1) 5 SG Designs and specifications are subject to change without notice. Page / 3