Sharp ER-A450T Dealer Knowledge Book - Page 6
Program SRV Reset
View all Sharp ER-A450T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Introduction RESET PROCEDURES 1. Program (SRV) Reset: To perform a Program Reset, the SRV key (p/n: LKGiM7113RCZZ) must be used. Please refer to (fig. 3) when performing the below key sequence. (1) Insert the SRV key and rotate it counterclockwise to the 6 o'clock position to the SRV' position. (Please note that the display goes out) (2) Count for 5 seconds. (3) Rotate the SRV key clockwise to the SRV (7 o'clock) position. (Please note that the display becomes lit and PRG. RESET *** is printed on the journal printer) OP OP,X/Z OFF PGM1 PGM2 (SRV) (SRV') SRV MA SM REG MGR X1/Z1 X2/Z2 (FIG.3) Failure to adhere to the above procedure may result in corrupt or broken RAM addressing Designs and specifications are subject to change without notice. Page / 5