Sharp KB-3300JS Service Manual - Page 45
Oven Door Assembly Removal, Oven Door Receptacle Hinge And Hingecover, Replacement, Oven Door
View all Sharp KB-3300JS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
OVEN DOOR REMOVAL OVEN DOOR ASSEMBLY REMOVAL 1. Disconnect the power supply cord. 2. Open the door to the fully opened position (Fig. O-1). 3. Pull the lock located on both hinge supports up and engage in the hook of the hinge levers. You may have to apply a little downward pressure on the door to pull the locks fully over the hooks (Fig. O-2). 4. Grab the door by the sides, pull the bottom of the door up and toward you to disengage the hinge supports. Keep pulling the bottom of the door toward you while rotating the top of the door toward the range to completely disengage the hinge levers (Fig. O-3). 5. Proceed in reverse to reinstall the door. 6. Make sure the hinge supports are fully engaged before unlocking the hinge levers. OVEN DOOR RECEPTACLE HINGE AND HINGECOVER REPLACEMENT 1. Disconnect the power supply cord. 2. Refer to the disassembly instructions found on Pages 38 - 40. 3. Remove (2) screws from Hinge Cover (Fig. O-4) 4. Remove Hinge Receptacle. 5 Proceed in reverse to reinstall the Hinge Receptacle and Hinge Cover. Fig. O-1 Fig. O-2 KB-3300JS KB-3300JK KB-3300JW Fig. O-4 Fig. O-3 Recepticle Hinge Recepticle Hinge Hinge Cover 43