Sharp MX-5001N MX-4100N MX-4101N MX-5001N Operation Manual Suite - Page 225

COPIER ADDING A WATERMARK TO A COPY (Watermark) When making a copy, specific text can be added to the copy as a watermark. The color, density, angle, and pages (first page only or all pages) can be selected for a watermark. The watermark is printed at the center of the paper. Printing "CONFIDENTIAL" on the paper CONFIDENTIAL The following 12 selections are available for the stamp text. CONFIDENTIAL PRIORITY PRELIMINARY FOR YOUR INFO. DO NOT COPY IMPORTANT URGENT DRAFT TOP SECRET FINAL COPY PLEASE REPLY Three levels can be selected for the density of the watermark. Seven colors can be selected for the watermark color. The angle of a watermark can be selected in the range +90 degrees to -90 degrees in increments of 45 degrees. 1 Touch the [Watermark] key in the stamp selection screen. See steps 1 to 4 of "GENERAL PROCEDURE FOR USING STAMP" (page 2-87). 2 Stamp Watermark CONFIDENTIAL FOR YOUR INFO. URGENT PRELIMINARY IMPORTANT TOP SECRET PRIORITY DO NOT COPY DRAFT FINAL COPY PLEASE REPLY Cancel Print Color Bk 1 2 3 Angle (+90 ~ -90) 45 OK First Page All Pages Touch the key of the watermark that you wish to use. 2-104 Contents