Sharp MX-5001N MX-4100N MX-4101N MX-5001N Operation Manual Suite - Page 793
staple case and remove the jammed
View all Sharp MX-5001N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 793 highlights
FINISHER (LARGE STACKER) TROUBLESHOOTING Open the front cover. 1 Squeeze the green parts of the staple case and pull the case up and then out. 2 Lower the lever at the front end of the staple case and remove the jammed staple. Remove the leading staple if it is bent. If bent staples remain, a staple jam will occur again. 3 Take care that a bent staple does not hurt you. Return the lever to its original position. 4 8-10 Contents
8-10
TROUBLESHOOTING
Contents
FINISHER (LARGE STACKER)
1
Open the front cover.
2
Squeeze the green parts of the staple
case and pull the case up and then out.
3
Lower the lever at the front end of the
staple case and remove the jammed
staple.
Remove the leading staple if it is bent. If bent staples remain, a
staple jam will occur again.
Take care that a bent staple does not hurt you.
4
Return the lever to its original position.