Sharp MX-5001N MX-4100N MX-4101N MX-5001N Operation Manual Suite - Page 451

FACSIMILE Press the [BLACK & WHITE START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished. • If you are scanning the original on the document glass, scan each page one page at a time. 5 When scanning finishes, place the next original and press the [BLACK & WHITE START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. A beep will sound to indicate that scanning is finished. To cancel scanning... Press the [STOP] key ( ) to cancel the operation. For a broadcast transmission, changes to the transaction report print conditions apply to all destinations. To cancel the transaction report setting... Touch the [Cancel] key in the screen of step 4. • System Settings (Administrator): Transaction Report Print Select Setting This is used to set the conditions for printing transaction reports. The factory default setting is . Single Sending: Print Out All Report/ Print Out Error Report Only /No Printed Report Broadcasting: Print Out All Report /Print Out Error Report Only/No Printed Report Receiving: Print Out All Report/Print Out Error Report Only/ No Printed Report Confidential Reception (fax mode): Print Out Notice Page /No Printed Report • System Settings (Administrator): Original Print on Transaction Report This is used to have part of the transmitted original printed on the transaction report. 4-96 Contents