Sharp XL-HP500 Operation Manual - Page 31

" Remote control Symptom ! The remote control does not operate. Possible cause ! Is the AC power lead of the unit plugged in? ! Is the battery polarity respected? ! Are the batteries dead? ! Is the distance or angle incor- rect? ! Does the remote control sensor receive strong light? XL-HP500W " Clearing all the memory (reset) 1 Press the ON/STAND-BY button to enter the power stand-by mode. 2 Whilst pressing down the / button and the X-BASS/DEMO button, press the ON/STAND-BY button until "CLEAR AL" appears. ENGLISH References " If trouble occurs When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1 Set the unit to the stand-by mode and turn the power on again. 2 If the unit is not restored in the previous operation, unplug and plug in the unit, and then turn the power on. Note: If neither operation above restores the unit, clear all the memory by resetting it. Caution: This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD programme. " Condensation Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (CD pickup, tape heads, etc.) or on the transmitter on the remote control. Condensation can cause the unit to malfunction. If this happens, leave the power on with no disc (or cassette) in the unit until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit. " Before transporting the unit Remove all CDs from the unit. Your unit checks whether there are any discs inside the unit when the tray is closed. "NO DISC" appears if no disc is left. Then, set the unit to the power stand-by mode. Carrying the unit with discs left inside can damage it. E-30 02/8/6 XL-HP500W(A)3.fm