Sharp XL-HP500 Operation Manual - Page 9

! Aerial connection Supplied FM aerial: Connect the FM aerial wire to the FM 75 OHMS terminal and position the FM aerial wire in the direction where the strongest signal can be received. Supplied AM loop aerial: Connect the AM loop aerial to the AM LOOP socket. Position the AM loop aerial for optimum reception. Place the AM loop aerial on a shelf, etc., or attach it to a stand or a wall with screws (not supplied). Note: Placing the aerial on the unit or near the AC power lead may cause noise pickup. Place the aerial away from the unit for better reception. Installing the AM loop aerial: < Assembling > < Attaching to the wall > XL-HP500W ! Speaker connection Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) terminal. ENGLISH Caution: " Connect the speaker wires to the speakers first, then to the unit. " Use speakers with an impedance of 6 ohms or more, as lower impedance speakers can damage the unit. " Do not mistake the right and the left channels. The right speaker is the one on the right side when you face the unit. " Do not let the bare speaker wires touch each other. " Do not allow any objects to fall into or to be placed in the bass reflex ducts. " Do not stand or sit on the speakers. You may be injured. Preparation for Use Wall Screws (not supplied) External FM aerial: Use an external FM aerial if you require better reception. Consult your dealer. External FM aerial 75 ohm coaxial cable Incorrect Speaker grilles are removable: Make sure nothing comes into contact with the speaker diaphragms when you remove the speaker grilles. Note: When an external FM aerial is used, disconnect the supplied FM aerial wire. Incorrect E-8 02/8/6 XL-HP500W(A)1.fm