Sharp XR-30XDM Operation Manual - Page 36
Useful Features, Operating with the Remote Control, Displaying and Setting the Break Timer
View all Sharp XR-30XDM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Operating with the Remote Control BREAK TIMER button POINTER button SPOT button Adjustment buttons (P/R/O/Q) Displaying the Pointer 1 Press POINTER and press P/R/ O/Q on the remote control to move the pointer. 2 Press POINTER again. • The pointer will disappear. ECO+QUIET button Displaying and Setting the Break Timer Using the Spot Function 1 Press SPOT and press P/R/O/Q on the remote control to move the spot area. 2 Press SPOT again. • The spot area will disappear. 1 Press BREAK TIMER. • The timer starts to count down from 5 minutes. On-screen display 2 Press P /R /O /Q to adjust the length of the break time. • Increases with P or Q 5 minutes s 6 minutes s 60 minutes • Shortens with O or R 4 minutes s 3 minutes s1 minute • The break time can be set in units of one minute (up to 60 minutes). Switching the Eco+Quiet Mode Press ECO+QUIET on the remote control or on the projector to switch the Eco+Quiet mode between on and off. • When the Eco+Quiet Mode is set to "ON", the sound of the cooling fan will turn down, the power consumption will decrease, and the lamp life will extend. Canceling the break timer display function Press BREAK TIMER. Note • Break Timer does not function while the pro- jector is operating the "Auto Sync", "FREEZE" or "AV MUTE" functions. Note • Refer to "Lamp Setting" on page 40 for details of the Eco+Quiet mode. 32