Sharp XR-30XDM Operation Manual - Page 44

Picture Adjustment ("Picture" Menu) (Continued) Menu operation n Page 37 2 Adjusting the Image 4 Progressive Adjustment items Contrast Bright Red*1 Blue*1 Color*2 Tint*2 *3 Sharp*2 Bright Boost*1 O button Q button For less contrast. For less brightness. For weaker red. For weaker blue. For less color intensity. For making skin tones purplish. For less sharpness. For high fidelity color reproduction. For more contrast. For more brightness. For stronger red. For stronger blue. For more color intensity. For making skin tones greenish. For more sharpness. For more vividness. *1 Not adjustable/selectable when selecting "sRGB". *2 Not displayed in the RGB input mode. *3 "Tone" will appear on the menu screen only when PAL or SECAM signals are input (including when forcibly changed to those input signals). There is basically no need to adjust "Tone", but you can adjust the picture tone with this adjustment when inputting PAL or SECAM signals . Note • "Bright Boost" and "CLR Temp" cannot be set when "sRGB" is selected. • To reset all adjustment items, select "Reset" and press ENTER. 3 Adjusting the Color Temperature Selectable items Description 2D Useful to display fast-moving images Progressive such as sports. 3D Useful to display relatively slow- Progressive moving images such as drama and documentary more clearly. Film Mode Reproduces the image of film source* clearly. Displays the optimized image of film transformed with three-two pull down (NTSC and PAL60Hz) or two-two pull down (PAL50Hz and SECAM) enhancement to progressive mode images. * The film source is a digital video recording with the original encoded as is at 24 frames/second. The projector can convert this film source to progressive video at 60 frames/second with NTSC and PAL60Hz or at 50 frames/second with PAL50Hz and SECAM to play back a high-definition image. Note • In NTSC or PAL60Hz, even if the 3D Progressive mode has been set, the three-two pull down enhancement will be enabled automatically when the film source has been entered. • When the image is blurred or noisy, switch to the optimal mode. • When using progressive inputs, inputs are directly displayed so that 2D Progressive, 3D Progressive and Film Mode cannot be selected. 5 Lamp Setting Selectable items Eco + Quiet Brightness and Power consumption Approx. 80% Selectable items Description Bright 100% For lower color temperature for -2 -1 warmer, images. reddish inPcandescent-like 0 R 1 Note • In the Eco + Quiet mode, the fan sound and power consumption are lower than those in the Bright mode. (Projection brightness de- 2 For higher color temperature for creases as shown in the chart.) The lamp life cooler, bluish, fluorescent-like images. will be approximately 3,000 hours (approxi- mately 2,000 hours in the Bright mode). Note • Values on "CLR Temp" are only for general standard purposes. 40