Singer CE-150 Futura Instruction Manual - Page 102
Performance Checklist
View all Singer CE-150 Futura manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
PERFORMANCE CHECKLIST GENERAL PROBLEMS Machine does not sew. * Power switch is turned off.- Turn on the switch (see page 10 - 11). * Buttonhole lever is not raised when sewing stitch patterns. - Raise buttonhole lever (see page 52 - 55). * Buttonhole lever is not lowered when sewing buttonhole. - Lower buttonhole lever (see page 52 - 55). Machine jams/knocks. * Thread is caught in hook. - Clean hook (see page 100 - 101). * Needle is damaged. - Replace needle (see page 96 - 97). Fabric does not move. * Presser foot is not lowered - Lower presser foot (see page 90 - 91). * Stitch length is too short - Lengthen stitch length (see page 24 - 27). * Feed dogs are lowered - Raise feed dogs (see page 90 - 91). STITCHING PROBLEMS Machine skips stitches. * Needle is not all the way up into needle clamp. - See page 96 - 97. * Needle is bent or blunt. - Replace needle (see page 96 - 97). * Machine is not threaded correctly. - See page 18 - 21. * Thread is caught in hook. - Clean hook (see page 100 - 101). Stitches are irregular. * Needle size is not correct for thread and fabric. - See page 96 - 97. * Machine is not threaded correctly. - See page 18 - 21. * Top thread tension is too loose. - See page 92 - 93. * Fabric is being pulled or pushed against machine feeding action. - Guide it gently. * Bobbin has not been wound evenly. - Rewind bobbin (see page 14 - 15). Needle breaks. * Fabric is being pulled or pushed against machine feeding action. - Guide it gently. * Needle size is not correct for thread and fabric. - See page 96 - 97. * Needle is not all the way up into the needle clamp. - See page 96 - 97. THREAD PROBLEMS Thread bunches. * Top and bobbin threads are not drawn back under presser foot before starting seam. - Draw both threads back under presser foot about 4 inches (10 cm) and hold until a few stitches are formed (see page 22 - 23). Needle thread breaks. * Machine is not threaded correctly. - See page 18 - 21. * Top thread tension is too tight. - See page 92 - 93. * Needle is bent. - Replace needle (see page 96 - 97). * Needle size is not correct for thread and fabric - See page 96 - 97. Bobbin thread breaks. * Bobbin case is not threaded correctly. - See page 16 - 17. * Lint accumulates in bobbin case or hook. - Remove lint (see page 100 - 101). Fabric puckers.