Sony Ericsson T28 World User Guide - Page 40

EricssonNoMtofboilreCCoommmmerucniiaclatUisoens AB Ring Signal Type You can choose a ring signal from a list of different sounds and melodies. You can also compose up to four melodies of your own by entering notes with the keypad. See "Composing Ring Signals" on page 41. To choose one of the ring signal types 1. Scroll to Settings, Y ES , Sounds & Alerts, Y ES , Ring Signals, YE S , Voice Calls, YE S. 2. Select the ring signal type that you want. Tip! If you do not wish to disturb other people, use the volume key on the side of the phone to scroll silently. Different Ring Signals for Line 1 and Line 2 If you subscribe to the Two Line Service, you can set different ring signals for the two lines. L1 and L2 are displayed instead of Voice. Different Ring Signals for Voice, Data and Fax Calls Provided your SIM subscription supports Fax and Data calls, you can set different ring signals for voice, fax and data calls respectively. Specific Ring Signals for Personal Calls If your subscription includes the Calling Line Identification (CLI) service, you can assign a personal ring signal to up to ten callers. You can, for example, have one ring signal for your friend and another one for your colleague. If the last seven digits of a caller's number correspond to a number you have specified, then that caller's ring signal is used. You can include question marks (?) in a phone number. For example, 012345??? means that calls from phone numbers between 012345000 and 012345999 will have the same personal ring signal. You get a question mark by pressing and holding #. To specify a caller's number and the accompanying ring signal 1. Scroll to Settings, Y ES , Sounds & Alerts, Y ES , Ring Signals, YE S, Personal Rings, YE S , Add new?, Y ES . 2. Enter the caller's number and press Y ES . You can also recall it from the Phone Book by pressing u. 3. Select the ring signal type you want. 40 Personalizing Your Phone