Sony BVME250 User Manual - Page 101
Appendixes, Specifications
View all Sony BVME250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Appendixes Appendixes Specifications Picture performance Panel OLED panel Picture size (diagonal) 623.4 mm (24 5/8 inches) Effective picture size (H × V) 543.4 × 305.6 mm (21 1/2 × 12 1/8 inches) Resolution (H × V) 1920 × 1080 pixels (Full HD) Aspect 16:9 Pixel efficiency 99.99% Panel drive RGB 10-bit Panel frame rate 48 Hz, 50 Hz, 60 Hz, 72 Hz, 75 Hz1) See "Picture Frame Display" (page 120). 1) 48 Hz, 60 Hz and 72 Hz are also compatible with a frame rate of 1/1.001. Viewing angle (Panel specification) 89º/89º/89º/89º (typical) (up/down/left/right, contrast > 10:1) Normal scan 0% scan Native scan Mapping the pixels of the signal to the panel to one-to-one mode, or displaying an SD signal of non- square pixels (the number of H pixels of the signal system is 720 or 1440) or a 640 × 480 SD signal of HDMI/DisplayPort video by scaling processing of doubling for the V direction and correct aspect ratio for the H direction and also optimizing and displaying a picture by modifying the aperture coefficient value, filter coefficient value, etc. Under scan 3% under scan Over scan Mask of 5% over scan portion in the normal scan Color temperature D55, D61, D65, D93, D-Cine2), (Setting possible in other color temperature) 2) D-Cine: x=0.314 y=0.351 Standard luminance 100 cd/m2 (Preset1 to Preset5) 48 cd/m2 (Preset (D-Cine)) (100% white signal input) Color space (color gamut) ITU-R BT.709, EBU, SMPTE-C, D-Cine3), E250 Native4), S-GAMUT5) 3) Chromaticity point of SMPTE RP 431-2 is not covered in full. 4) The BVM-E250 individual chromaticity points. The widest color space setting of the signal reproduced by the BVM-E250 x y R 0.681 0.319 G 0.189 0.724 B 0.141 0.051 (Typical) 5) For displaying the color gamut of the wide color space mode S-GAMUT, which is available for the F23 or F35 Digital Cinematography Camera Warm-up time Approx. 30 minutes Input SDI BNC (×2) Input impedance: 75 ohms unbalanced Signal format See "Available Signal Systems" (page 106) and "Available Signal Formats" (page 108). Sampling frequency 3G-SDI: Y/Cb/Cr (4:2:2) 148.5MHz/74.25MHz/74.25MHz Y/Cb/Cr (4:4:4) 148.5MHz/148.5MHz/148.5MHz G/B/R (4:4:4) 148.5MHz/148.5MHz/148.5MHz HD-SDI: Y/Cb/Cr (4:2:2) 74.25MHz/37.125MHz/37.125MHz SD-SDI: Y/Cb/Cr (4:2:2) 13.5MHz/6.75MHz/6.75MHz 101 Specifications