Sony BVME250 User Manual - Page 23

Connections Connecting the Controller (BKM16R) Note on connecting the cable to the DC 5V OUT connector Be sure to plug the male connector of the cable into the DC 5V OUT connector of the monitor. Insert the connector so as to fit the shape of the DC 5V OUT connector. Monitor DC 5V OUT connector NETWORK switch t Set to PEER TO PEER. Plug the male connector into the monitor. LAN (10/100) connector Chapter 2 Preparations SMF-700, etc. Controller (BKM-16R) DC 5V/12V IN connector LAN (10/100) connector NETWORK switch tSet to PEER TO PEER. 1 Turn off the MAIN POWER switch of the monitor before connecting the units. 2 Set the NETWORK switches of the monitor and the controller to PEER TO PEER. 3 Connect the LAN (10/100) connector of the monitor and the LAN (10/100) connector of the controller by using the SMF-700 or the cable supplied with the BKM-37H/38H, or a 10BASE-T/100BASE-TX straight LAN cable (shielded-type, optional). Note When an optional LAN cable is connected, use a shielded-type cable to prevent a malfunction due to noises. 4 Connect the DC 5V OUT connector of the monitor and the DC 5V/12V IN connector of the controller by using the SMF-700 or the cable supplied with the BKM-37H/ 38H. Or connect the output cable of the AC adaptor supplied 23 Connections