Sony BVME250 User Manual - Page 97
Assigning a Function to a Function Button
View all Sony BVME250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
DisplayPort signal STATUS (DisplayPort) Pixel Encoding: Color Depth: Matrix: RGB Range: 3/3 v V YCbCr 4:4:4 10bit ITU-R BT.601 --- Pixel Encoding: RGB 4:4:4 / YCbCr 4:4:4 / YCbCr 4:2:2 Color Depth: 8bit / 10bit / 12bit (HDMI signal), or 6bit/8bit/10bit/12bit (DisplayPort signal) Matrix1): ITU-R BT.601 / ITU-R BT.709 RGB Range2): Limit / Full 1) It is displayed when HDMI/DisplayPort Auto is set to On in the Matrix menu of the Channel Configuration menu. 2) It is displayed when HDMI/DisplayPort Auto is set to On in the RGB Range menu of the Channel Configuration menu. Assigning a Function to a Function Button You can assign a function other than the factory preset on the function button of the controller. 1 Select the Function Key menu in the Controller menu. 2 Select F1 to F16 button, and then the function assigned on each button. Assignable functions Scan Mode, Native Scan, 16:9, H Delay, V Delay, External Sync, Comb, Char Off, Color Temp, Status, Aperture, Mono, Blue Only, R Off, G Off, B Off, Chroma Up, Interlace, Pixel Zoom, Capture Load, Marker, Aspect Marker, Area Marker 1, Area Marker 2, Center Marker, Aspect Marker-Line, Aspect Blanking-Half, Aspect Blanking-Black, Side by Side, Wipe, Butterfly, Blending, Error Notify Clear, Audio Level Meter, ALM Hold Reset, Time Code, Difference, Checkerboard, L/R Switch, Horopter Check, Flip H, Black Frame Insertion, Black Detail Mode, Degauss For details on the assigned function, see "Function Key" (page 79) in the Controller menu. Chapter 4 Operations 97 Assigning a Function to a Function Button