Sony BVME250 User Manual - Page 53

Betacam Setup Level

Get Sony BVME250 PDF manuals and user guides View all Sony BVME250 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Chapter 3 Menu Menu H Shift Offset Channel Name NTSC Setup Level Component Level Betacam Setup Level RGB Range HD DC 2048 × 1080 HDMI DisplayPort HDMI/DisplayPort Auto Function and operation ([ ]: factory setting) Sets the horizontal picture position when the analog signal is input. You can select when Format is set to Composite Auto, Composite NTSC, Composite PAL, Composite PAL-M, Composite SECAM, YC Auto, YC NTSC, YC PAL, YC PAL-M, YC SECAM, Component YPbPr or Component RGB. Set to -100 to +1001). [000] 1) When the setting value is out of range, the display of the setting value is changed but the horizontal position of the picture is not changed. To hide the characters on the monitor during adjustment Set the CHAR OFF button of the controller to on. As the characters on the display are hidden, it becomes easy to adjust the picture. To display the characters, set the CHAR OFF button to off. Sets a channel name. When the item is selected, you can select a preset name, or enter a new one. PROG: Program signal EDIT: Signal from an editor CAM: Camera signal VTR: Signal from a VTR PREV: Preview monitor New Name: Enter a new name. (Up to 20 characters can be entered.) Sets the NTSC setup level. You can select when Format is set to Composite Auto, Composite NTSC, YC Auto or YC NTSC. You can select from 0% or 7.5%. Sets the component level of the analog component 480/60i signal. You can select when Format is set to Component YPbPr. You can select from SMPTE/EBU-N10 or Betacam. Sets the Betacam setup level when Component Level is set to Betacam. You can select from 0% or 7.5%. Sets the quantization range of the 4:4:4 RGB SDI, HDMI or DisplayPort input signal. Sets the quantization range when a 4:4:4 RGB SDI signal is input and the signal system is 1920 × 1080 or 1280 × 720. Full: 0 (black level) to 1023 (10bit)/4095 (12bit) (white level) [Limit]: 64(10bit)/256 (12bit) (black level) to 940 (10bit)/3760 (12bit) (white level) Sets the quantization range when a 4:4:4 RGB SDI signal is input and the signal system is 2048 × 1080. [Full]: 0 (black level) to 1023 (10bit)/4095 (12bit) (white level) Limit: 64 (10bit)/256 (12bit) (black level) to 940 (10bit)/3760 (12bit) (white level) Sets the display mode for the HDMI signal. Full: 0 (black) to 255 (8bit)/1023 (10bit)/4095 (12bit) (white level) [Limit]: 16 (8bit)/64 (10bit)/256 (12bit) (black level) to 235 (8bit)/940 (10bit)/3760 (12bit) (white level) Sets the display mode for the DisplayPort signal. [Full]: 0 (black level) to 63 (6bit)/255 (8bit)/1023 (10bit)/4095 (12bit) (white level) Limit: 4 (6bit)/16 (8bit)/64 (10bit)/256 (12bit) (black level) to 58 (6bit)/235(8bit)/940 (10bit)/3760 (12bit) (white level) Sets the manual or automatic setting for the quantization range of the HDMI or DisplayPort signal. Off: Select to use the quantization range set in the HDMI or DisplayPort menu. [On]: Select to set the quantization range automatically according to the input signal. 53 Channel Configuration Menu

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
53
Channel Configuration Menu
Chapter 3
Menu
H Shift Offset
Sets the horizontal picture position when the analog signal is input.
You can select when Format is set to Composite Auto, Composite NTSC, Composite PAL,
Composite PAL-M, Composite SECAM, YC Auto, YC NTSC, YC PAL, YC PAL-M, YC
SECAM, Component YPbPr or Component RGB.
Set to
–100
to
+100
1)
.
[000]
1) When the setting value is out of range, the display of the setting value is changed but the horizontal position
of the picture is not changed.
To hide the characters on the monitor during adjustment
Set the CHAR OFF button of the controller to on.
As the characters on the display are
hidden, it becomes easy to adjust the picture.
To display the characters, set the CHAR OFF
button to off.
Channel Name
Sets a channel name.
When the item is selected, you can select a preset name, or enter a new one.
PROG:
Program signal
EDIT:
Signal from an editor
CAM:
Camera signal
VTR:
Signal from a VTR
PREV:
Preview monitor
New Name:
Enter a new name.
(Up to 20 characters can be entered.)
NTSC Setup Level
Sets the NTSC setup level.
You can select when Format is set to Composite Auto, Composite NTSC, YC Auto or YC
NTSC.
You can select from
0%
or
7.5%
.
Component Level
Sets the component level of the analog component 480/60i signal.
You can select when Format is set to Component YPbPr.
You can select from
SMPTE/EBU-N10
or
Betacam
.
Betacam Setup Level
Sets the Betacam setup level when Component Level is set to Betacam.
You can select from
0%
or
7.5%
.
RGB Range
Sets the quantization range of the 4:4:4 RGB SDI, HDMI or DisplayPort input signal.
HD
Sets the quantization range when a 4:4:4 RGB SDI signal is input and the signal system is
1920 × 1080 or 1280 × 720.
Full:
0 (black level) to 1023 (10bit)/4095 (12bit) (white level)
[Limit]:
64(10bit)/256 (12bit) (black level) to 940 (10bit)/3760 (12bit) (white level)
DC 2048 × 1080
Sets the quantization range when a 4:4:4 RGB SDI signal is input and the signal system is
2048 × 1080.
[Full]:
0 (black level) to 1023 (10bit)/4095 (12bit) (white level)
Limit:
64 (10bit)/256 (12bit) (black level) to 940 (10bit)/3760 (12bit) (white level)
HDMI
Sets the display mode for the HDMI signal.
Full:
0 (black) to 255 (8bit)/1023 (10bit)/4095 (12bit) (white level)
[Limit]:
16 (8bit)/64 (10bit)/256 (12bit) (black level) to 235 (8bit)/940 (10bit)/3760 (12bit)
(white level)
DisplayPort
Sets the display mode for the DisplayPort signal.
[Full]:
0 (black level) to 63 (6bit)/255 (8bit)/1023 (10bit)/4095 (12bit) (white level)
Limit:
4 (6bit)/16 (8bit)/64 (10bit)/256 (12bit) (black level) to 58 (6bit)/235(8bit)/940
(10bit)/3760 (12bit) (white level)
HDMI/DisplayPort Auto
Sets the manual or automatic setting for the quantization range of the HDMI or DisplayPort
signal.
Off:
Select to use the quantization range set in the HDMI or DisplayPort menu.
[On]:
Select to set the quantization range automatically according to the input signal.
Menu
Function and operation ([
]: factory setting)