Sony BVME250 User Manual - Page 22
Attaching the Bracket
View all Sony BVME250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Chapter 2 Preparations When the BKM-250TG is used, install the Link A signal to INPUT 1, and the Link B signal to INPUT 2. Attaching the Bracket INPUT 1 You can prevent falling of the monitor by using the supplied bracket. 1 Remove three screws from the bracket. INPUT 2 Bracket (supplied) For 3D signal analyzing function Use a 3D-compatible BKM-250TG (with serial number 7300001 or higher) and input the left 3D signal to INPUT 1 and the right signal to INPUT 2. 2 Attach the bracket on the rear panel of the monitor with the three removed screws. 22 Attaching the Bracket 3 Attach a piece of string, etc. to the bracket and secure it to the floor or wall. Bracket String, etc.
22
Attaching the Bracket
Chapter 2
Preparations
When the BKM-250TG is used,
install the Link A signal
to INPUT 1, and the Link B signal to INPUT 2.
For 3D signal analyzing function
Use a 3D-compatible BKM-250TG (with serial number
7300001 or higher) and input the left 3D signal to INPUT
1
and the right signal to INPUT 2.
Attaching the Bracket
You can prevent falling of the monitor by using the
supplied bracket.
1
Remove three screws from the bracket.
2
Attach the bracket on the rear panel of the monitor with
the three removed screws.
3
Attach a piece of string, etc. to the bracket and secure
it to the floor or wall.
INPUT 2
INPUT 1
Bracket (supplied)
Bracket
String, etc.