Sony BVME250 User Manual - Page 28
Selecting the Monitor (Designation of the Monitor or Group ID Number)
View all Sony BVME250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Chapter 2 Preparations 4 Set the NETWORK switches of the monitor and the controller to LAN. NETWORK switch tSet to LAN. NETWORK switch tSet to LAN. Selecting the Monitor (Designation of the Monitor or Group ID Number) When the multiple monitors are connected by the network connections, you can remotely connect the monitors from the controller by designating the set monitor ID number or group ID number. The monitor of the designated group is connected remotely. The group ID number is displayed on all connected monitors when the button is held pressed. ALL button: Selects all connection mode. All monitors are connected remotely. The lamp corresponding the pressed button flashes and lights after recognizing the monitor. 2 Select the monitor ID number for the single connection mode or group ID number for the group connection mode by pressing the UP/DOWN or numeric button. Up to 99 is entered as the monitor ID or group ID number. 3 Press the ENTER or Ent button to confirm the setting. The monitor ID number, group ID number or ALL is displayed in the display window. Notes • When the monitor with no assigned monitor ID number or group ID number is selected, the setting is not changed and the previous connection status is maintained. • When there are monitors with the same ID number, the monitor with the lower IP address is selected. • Even if a different monitor ID number is set to the monitors, when the same IP address is set to another monitor, the monitor cannot be connected to the network. Assigning the Input Signal to the Channel Display window Lamp 3 1 2 2 3 When you assign the input signal to the channel, you can select the channel and change the input signal by pressing the numeric button. The input signal is assigned to one of channels 1 to 30. 1 Press the corresponding button to select the connection mode. SINGLE button: Selects single connection mode. The designated monitor is connected remotely. The monitor ID number is displayed on all connected monitors when the button is held pressed. GROUP button: Selects group connection mode. 1 1 Select the channel (CH1 to CH30) to be assigned by pressing the numeric button of the controller. 28 Settings