Sony BVME250 User Manual - Page 96
Interlace Display
View all Sony BVME250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Chapter 4 Operations RGB Range: Displays RGB Range set in the Channel Configuration menu. 1080I/PsF: Displays 1080I/PsF set in the Channel Configuration menu. Scan Mode: Displays the selected scan mode. Aspect Mode: Displays the selected aspect ratio. Interlace Display: Displays On/Off of the interlace display. Page 2/3 Information on the picture adjustments is displayed. STATUS (Picture Configuration) Color Profile: Color Space: Gamma: Color Temp: BVM EBU EBU CRT BVM User1 2/3 v V Picture Preset: Chroma: Bright: Contrast: Matrix: Preset1 1000 000 1000 ITU-R BT.709 Color Profile: Displays Color Profile set in the Channel Configuration menu. Color Space: Displays Color Space set in Color Profile Gamma: Displays Gamma set in Color Profile Color Temp: Displays Color Temp set in the Channel Configuration menu. Picture Preset: Displays Picture Preset set in the Channel Configuration menu. Chroma: Displays the Chroma value of the selected Picture Preset. Bright: Displays the Bright value of the selected Picture Preset. Contrast: Displays the Contrast value of the selected Picture Preset. Matrix: Displays Matrix set in the Channel Configuration menu. Page 3/3 When the SDI signal is input The same information as that of SDI Payload ID Status in the System Status menu is displayed. STATUS (SDI Payload ID) Option1/Input1 3/3 v V Payload ID B1 B2 B3 B4 Video Standard: HD-SDI Sampling Structure: 4:2:2 Y/Cb/Cr Bit Depth: 10bit Picture Rate: 59.94 Scannin:g Method Interlace/Interlace Link Number: Single/Link_1 Current Status Format: HD 422 YCbCr 10 I/PsF/P: Interlace OptionX/InputX: Input port and input connector of the displayed information Standard or Option1 to 4 is displayed as an input port, and Input1 or Input2 is displayed as an input connector. Payload ID: Displays the 4-byte data for Payload ID of the SMPTE-352M standard in hexadecimal in sequence of Byte 1, Byte 2, Byte 3 and Byte 4. When the Payload ID information is not set, only Current Status is displayed, and "---" is displayed for other items. When the following information is not decoded, Unknown is displayed. Video Standard: Decode display of Byte 1_Bit 6-0 Sampling Structure: Decode display of Byte 3_Bit 3-0 Bit Depth: Decode display of Byte 4_Bit 1-0 Picture Rate: Decode display of Byte 2_Bit 3-0 Scanning Method: Decode display of Byte 2_Bit 7 / Byte 2_Bit 6 Link Number: Decode display of Byte 4_Bit 7-6 Current Status: Displays the current status of the monitor. Format: Displayed as "Video Standard + Sampling Structure + Bit Depth". Video Standard: 3G / DL / HD / SD Sampling Structure: 422 YCbCr / 444 YCbCr / 444 RGB / 444 XYZ Bit Depth: 10 / 12 I/PsF/P: Interlace / PsF / Progressive When the HDMI/DisplayPort signal is input The same information as that of HDMI/DP Status in the System Status menu is displayed. HDMI signal STATUS (HDMI) Pixel Encoding: Color Depth: Matrix: RGB Range: 3/3 v V YCbCr 4:4:4 12bit ITU-R BT.601 --- 96 Displaying the Monitor Status Page