Sony DCR-TRV740 Operating Instructions (primary manual) - Page 108

Changing the menu settings Icon/item Mode Meaning HiFi SOUND z STEREO To play back a stereo tape or dual sound track tape with main and sub sound (p. 188) 1 To play back a stereo tape with the left sound or a dual sound track tape with main sound 2 To play back a stereo tape with the right sound or a dual sound track tape with sub sound TBC* z ON To correct jitter OFF To not correct jitter. Set TBC to OFF when playing back a tape on which you have dubbed over and recorded the signal of a TV game or similar machine. TBC stands for "Time Base Corrector". DNR* z ON To reduce picture noise OFF To reduce a conspicuous afterimage when the picture has a lot of movement DNR stands for "Digital Noise Reduction". AUDIO MIX - To adjust the balance between the stereo 1 and stereo 2 POWER switch VCR VCR VCR VCR A/V t DV OUT z OFF ON PB MODE z AUTO / ST1 ST2 To output digital images and sound in analog format using your camcorder To output analog images and sound in digital format using your camcorder (p. 88) To automatically select the system (Hi8/ standard 8 or Digital8 ) that was used to record on the tape, and play back the tape To play back a tape that was recorded in the Hi8/standard 8 system when your camcorder does not automatically distinguish the recording system VCR VCR * When you play back tapes recorded in the Hi8/standard 8 system only Notes on AUDIO MIX •When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance. •You can adjust the balance only for tapes recorded in the Digital8 system. Note on PB MODE The mode will return to the default setting when: - you remove the battery pack or power source. - you turn the POWER switch. 108