Sony DCR-TRV740 Operating Instructions (primary manual) - Page 170

Preventing accidental erasure - Image protection - Except DCR-TRV240 You can protect selected images, to prevent accidental erasure of important images. Before operation Insert a "Memory Stick" into your camcorder. (1) Set the POWER switch to MEMORY or VCR. Make sure that the LOCK switch is set to the left (unlock) position. (2) Play back the image you want to protect. (3) Press MENU to display the menu settings. (4) Turn the SEL/PUSH EXEC dial to select PROTECT in , then press the dial. (5) Turn the SEL/PUSH EXEC dial to select ON, then press the dial. (6) Press MENU to make the menu settings disappear. The - mark is displayed beside the data file name of the protected image. 3,6 MENU 4 MEMORY SET STILL SET MOVIE SET PRINT MARK PROTECT OFF SLIDE SHOW FILE NO. DELETE ALL FORMAT RETURN [MENU] : END 21/40 5 MEMORY SET 21/40 STILL SET MOVIE SET PRINT MARK PROTECT ON SLIDE SHOW OFF FILE NO. DELETE ALL FORMAT RETURN [MENU] : END MEMORY SET 21/40 STILL SET MOVIE SET PRINT MARK PROTECT ON SLIDE SHOW OFF FILE NO. DELETE ALL FORMAT RETURN [MENU] : END MEMORY SET STILL SET MOVIE SET PRINT MARK PROTECT ON SLIDE SHOW FILE NO. DELETE ALL FORMAT RETURN [MENU] : END 21/40 To cancel image protection Select OFF in step 5, then press the SEL/PUSH EXEC dial. Note Formatting erases all information on the "Memory Stick", including the protected image data. Before formatting a "Memory Stick", check its contents. If the write-protect tab on the "Memory Stick" is set to LOCK You cannot protect images. 170