Sony DCR-TRV740 Operating Instructions (primary manual) - Page 37

Playback - Basics Playing back a tape To monitor high-speed pictures while advancing or rewinding the tape (skip scan) Keep pressing m while rewinding or M while advancing the tape. To resume rewinding or advancing, release the button. To view pictures at slow speed (slow playback) Press y on the Remote Commander during playback. For slow playback in the reverse direction, press , then press y on the Remote Commander. To resume normal playback, press N. To view pictures at double speed Press ×2 on the Remote Commander during playback. For double speed playback in the reverse direction, press , then press ×2 on the Remote Commander. To resume normal playback, press N. To view pictures frame-by-frame Press C on the Remote Commander in the playback pause mode. For frame-by-frame playback in the reverse direction, press c. To resume normal playback, press N. To search the last scene recorded (END SEARCH) Press END SEARCH in the stop mode. The last five seconds of the recorded section plays back and stops. In the various playback modes •Noise may appear when your camcorder plays back tapes recorded in the Hi8/ standard 8 system. •Sound is muted. •The previous recording may appear as a mosaic image when playing back in the Digital8 system. Notes on the playback pause mode •When the playback pause mode lasts for three minutes, your camcorder automatically enters the stop mode. To resume playback, press N. •The previous recording may appear. Slow playback for tapes recorded in the Digital8 system Slow playback can be performed smoothly on your camcorder; however, this function does not work for an output signal through the DV IN/OUT jack. When you play back a tape in reverse Horizontal noise may appear at the center, or top and bottom of the screen. This is not a malfunction. 37