Sony DCR-TRV740 Operating Instructions (primary manual) - Page 130
Superimposing a still image in the, Memory Stick, on an image, MEMORY MIX, Recording superimposed
View all Sony DCR-TRV740 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Superimposing a still image in the "Memory Stick" on an image - MEMORY MIX Recording superimposed images on a tape Before operation •Insert a tape for recording into your camcorder. •Insert a "Memory Stick" is recorded still images into your camcorder. (1) Set the POWER switch to CAMERA. (2) In the standby mode, press MEMORY MIX. The last recorded or last composed image appears on the lower part of the screen as a thumbnail image. (3) Press MEMORY+/- to select the still image you want to superimpose. To see the previous image, press MEMORY -. To see the next image, press MEMORY+. (4) Turn the SEL/PUSH EXEC dial to select the desired mode. The mode changes as follows: M. CHROM y M. LUMI y C. CHROM y M. OVERLAP (5) Press the SEL/PUSH EXEC dial. The still image is superimposed on the moving picture. (6) Turn the SEL/PUSH EXEC dial to adjust the effect. M. CHROM - The color (blue) scheme of the area in the still image which is to be swapped with a moving picture M. LUMI - The color (bright) scheme of the area in the still image which is to be swapped with a moving picture C. CHROM - The color (blue) scheme of the area in the moving picture which is to be swapped with a still image M. OVERLAP - No adjustment necessary The fewer bars there are on the screen, the stronger the effect becomes. (7) Press START/STOP to start recording. 2 MEMORY MIX M. CHROM 100-0021 Still image 3 130 4 M. LUMI 5 100-0021 M. LUMI I I I 6 100-0021 M. LUMI I 100-0021