Sony DPP-FP35 Operating Instructions - Page 16
Connecting the AC power source
View all Sony DPP-FP35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
5Connecting the AC power source 1 Insert one plug of the supplied AC power cord to the supplied AC adaptor. 2 Insert the other plug of the AC power cord to the wall outlet close by (wall socket). 3 Insert the plug of the AC adaptor to the DC IN 24V jack of the printer. The 1 (on/standby) indicator lights in red. To DC IN 24V Precautions • The printer is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet , even if the printer itself has been turned off. • Connect the AC adaptor to an easily accessible wall outlet close by. If some trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet. • When you have finished using the AC adaptor, disconnect it from the DC IN 24V jack of the printer. • The print paper emerges from the rear a few times during printing. Do not block the rear with the AC adaptor or AC power cord. • Be sure to use the AC adaptor supplied with the printer. Do not use other AC adaptor, as this may cause malfunction. • In case the cord of the AC adaptor is damaged, never use it any longer, as this may cause danger. • Do not short the DC plug of the AC adaptor with a metallic object, as this may cause malfunction. • Do not use the AC adaptor in a narrow space, such as the one between the printer and the wall. AC power cord (supplied) AC adaptor AC-S2425 (supplied) To the wall outlet 16 GB