Sony DSC-T200/R Cyber-shot® Handbook (Large File - 10.47 MB) - Page 116
Touch panel, Others, The lens gets fogged.
View all Sony DSC-T200/R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Troubleshooting Cannot print the image at the size selected. • Disconnect the cable for multi-use terminal and reconnect it whenever you change the paper size after the printer has been connected to the camera. • The print setting of the camera differs from that of the printer. Change the setting of either the camera (page 103) or the printer. Cannot operate the camera after canceling printing. • Wait for a while as the printer is carrying out the cancellation. It may take some time depending on the printer. Touch panel Cannot operate the touch panel buttons correctly or fully. • Perform [Calibration] (page 72). • [Housing] is set to [On] (page 72). The paint pen operation reacts at inappropriate points. • Perform [Calibration] (page 72). Others The file number cannot be reset. • Even if you change the recording media, the file number cannot be reset in the camera. To reset, perform [Format] (pages 68, 70) with the camera, and then reinitialize the settings (page 71). However, all data will be erased, and all settings including the date and time are cancelled. The lens gets fogged. • Moisture condensation has occurred. Turn off the camera and leave it for about an hour before using it. The camera becomes warm when you use it for a long time. • This is not a malfunction. The Clock Set screen appears when you turn on the camera. • Set the date and time again (page 79). You want to change the date or time. • Set the date and time again (page 79). 116