Sony DVP-NS700P Operating Instructions - Page 22

B Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to an MD deck or DAT deck This connection will use your 2 front speakers connected to your stereo amplifier (receiver) for sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use B-1 . If the amplifier (receiver) has a digital input jack, use B-2 . When connecting to an MD deck or a DAT deck, use B-2 . In this case, you can also connect the player directly to the MD deck or DAT deck without using your stereo amplifier (receiver). xRecommended surround sound effects for the B-1 connection only N TVS STANDARD (page 51) z In connection B-1 , you can use the supplied audio/video cord instead of using a separate audio cord. z To realize better surround sound effects, make sure that your listening position is in between your speakers. Note If you select one of the TVS effects while playing a disc, no sound will come from your speakers with the B-2 connection. CD/DVD player COAXIAL OPTICAL PCM/DTS/ DOLBY DIGITAL DIGITAL OUT R- AUDIO 1 - L VIDEO 1 1 2 R- AUDIO 2 - L VIDEO 2 Y PROGRESSIVE PB INTERLACE SELECTABLE PR LINE OUT S VIDEO COMPONENT VIDEO OUT OUT VIDEO OUT SCAN SELECT B-2 Coaxial digital cord (not supplied) (white) COAXIAL OPTICAL PCM/DTS/ DOLBY DIGITAL DIGITAL OUT Optical digital cord (not supplied) Remove jack cap before connecting or or (red) Stereo audio cord (not supplied) (white) (red) B-1 R- AUDIO 1 - L VIDEO 1 R- AUDIO 2 - L VIDEO 2 LINE OUT to coaxial or optical digital input to audio input [Speakers] Front (L) Stereo amplifier (receiver) 22 Front (R) l: Signal flow MD deck/DAT deck