Sony DVP-NS700P Operating Instructions - Page 75
Setting the digital output signal, DIGITAL OUT, DOLBY DIGITAL
View all Sony DVP-NS700P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
xDIGITAL OUT Selects if DTS signals are output via the DIGITAL OUT (OPTICAL or COAXIAL) jacks. ON OFF Normally, select this position. When you select "ON," set "DOLBY DIGITAL" and "DTS." For details on setting these items, see "Setting the digital output signal." The player does not output the audio signals via the DIGITAL OUT (OPTICAL and COAXIAL) jacks. The influence of the digital circuit upon the analog circuit is minimal. Setting the digital output signal Switches the method of outputting audio signals when you connect the following component using an optical or a coaxial digital cord via the DIGITAL OUT (OPTICAL or COAXIAL) jacks. - Amplifier (receiver) with digital input jack - Amplifier (receiver) with a built-in DTS or DOLBY DIGITAL decoder - MD or DAT deck For connection details, see page 20. Select "DOLBY DIGITAL" and "DTS" after setting "DIGITAL OUT" to "ON." AUDIO SETUP AUDIO ATT: OFF AUDIO DRC: STANDARD DOWNMIX: DOLBY SURROUND DIGITAL OUT: ON DOLBY DIGITAL: D-PCM DTS: OFF T h xDOLBY DIGITAL Selects the Dolby Digital signals output via the DIGITAL OUT (OPTICAL or COAXIAL) jacks. D-PCM DOLBY DIGITAL Select this when the player is connected to an audio component lacking a built-in Dolby Digital decoder. You can select whether the signals conform to Dolby Surround (Pro Logic) or not by making adjustments to the "DOWNMIX" item in "AUDIO SETUP" (page 74). Select this when the player is connected to an audio component with a built-in Dolby Digital decoder. If the player is connected to an audio component lacking a builtin Dolby Digital decoder, do not set this. Otherwise, when you play the Dolby Digital sound track, a loud noise (or no sound) will come out from the speakers, affecting your ears or causing the speakers to be damaged. Settings and Adjustments Note If you select one of the TVS settings while playing a DVD, the player does not output Dolby Digital signals from the DIGITAL OUT (COAXIAL and OPTICAL) jacks (when you set "DOLBY DIGITAL" in "AUDIO SETUP" to "D-PCM"). xDTS Selects if DTS signals are output via the DIGITAL OUT (OPTICAL or COAXIAL) jacks. OFF ON Select this when the player is connected to an audio component lacking a built-in DTS decoder. Note, however, that the DTS signals contained in a CD are output even if "OFF" is selected. Select this when the player is connected to an audio component having a built-in DTS decoder. If the player is connected to an audio component lacking a built-in DTS decoder, do not set this. Otherwise, when you play the DTS sound track, a loud noise (or no sound) will come out from the speakers, affecting your ears or causing the speakers to be damaged. 75