Sony DVP-NS700P Operating Instructions - Page 70
When “progressive” Is Selected In “component Out”, Screen Saver, Background, Component Out
View all Sony DVP-NS700P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
4:3 LETTER BOX 4:3 PAN SCAN 16:9 Note Depending on the DVD, "4:3 LETTER BOX" maybe selected automatically instead of "4:3 PAN SCAN" or vice versa. xSCREEN SAVER Turns on and off the screen saver so that the screen saver image appears when you leave the player in pause or stop mode for 15 minutes, or when you play back a CD for more than 15 minutes. The screen saver will help prevent your display device from becoming damaged (ghosting). Press H to turn off the screen saver. ON OFF Turns on the screen saver. Turns off the screen saver. xBACKGROUND Selects the background color or picture on the TV screen in stop mode or while playing a CD. JACKET PICTURE The jacket picture (still picture) appears in the background, but only when the jacket picture is already recorded on the disc (CD-EXTRA, etc.). If the disc does not contain a jacket picture, the "GRAPHICS" picture appears. GRAPHICS A preset picture stored in the player appears in the background. BLUE The background color is blue. 70 BLACK The background color is black. xCOMPONENT OUT This will change the type of signal output from the COMPONENT VIDEO OUT jacks on the player. See page 71 for more information about the different types. INTERLACE This outputs the signal in interlace format. Select this when you are connected to a standard (interlace format) TV. PROGRESSIVE This outputs the signal in progressive (480p) format. Select this when you have a TV that can accept progressive signals. z When the player outputs a Progressive video signal, the PROGRESSIVE indicator lights up. Note If you select "PROGRESSIVE" when you connect the player to a TV that cannot accept the signal in progressive format (480p), the image quality will deteriorate. In this case, set the VIDEO OUT SCAN SELECT switch on the back panel of the player to INTERLACE. Then set "COMPONENT OUT" to "INTERLACE" when you can see the TV screen correctly, and reset VIDEO OUT SCAN SELECT to SELECTABLE. When "PROGRESSIVE" is selected in "COMPONENT OUT" You can fine-tune the Progressive (480p) video signal output when you select "PROGRESSIVE" in "COMPONENT OUT" of the "CUSTOM SETUP" display and connect the player to the TV that is able to accept the video signal in progressive format (480p). xMODE (Conversion Modes) DVD software can be divided into two types: film based software and video based software. Video based software is derived from TV, such as dramas and sit-coms, and displays images at 30 frames/60 fields per