Sony DVP-NS700P Operating Instructions - Page 51
TV Virtual Surround Sound Settings (TVS), Press DISPLAY during playback., Press, to select, TVS
View all Sony DVP-NS700P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
TV Virtual Surround Sound Settings (TVS) When you connect a stereo TV or 2 front speakers, TV Virtual Surround lets you enjoy surround sound effects by using sound imaging to create virtual rear speakers from the sound of the front speakers (L: left, R: right) without using actual rear speakers. This function is designed to work with the LINE OUT L/R (AUDIO) 1/2 jacks. Note that if you select one of the TVS settings while playing a DVD, the player does not output Dolby Digital signals from the DIGITAL OUT (COAXIAL and OPTICAL) jacks (when you set "DOLBY DIGITAL" in "AUDIO SETUP" to "D-PCM") (page 75). SURROUND DISPLAY X/x ENTER 1 Press DISPLAY during playback. The Control Menu appears. 2 Press X/x to select (TVS), then press ENTER. The options for "TVS" appear. 1 2 ( 2 7 ) 1 8 ( 3 4 ) T 1:32:55 PLAY DVD OFF OFF TVS DYNAMIC TVS WIDE VIRTUAL 3D SURROUND 3 Press X/x to select one of the TVS (TV Virtual Surround) sounds. Refer to the following explanations given for each item. NTVS DYNAMIC NTVS WIDE NTVS NIGHT NTVS STANDARD 4 Press ENTER. To reset the TVS setting Select "OFF" in Step 3. To turn off the Control Menu Press DISPLAY repeatedly until the Control Menu is turned off. TVS (TV Virtual Surround) DYNAMIC Uses sound imaging to create virtual rear speakers from the sound of the front speakers (L/R) without using actual rear speakers (shown below). The sound imaging effect is distinct and clearly reproduces each aural element of the audio track. This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV. TV continued 51 Sound Adjustments