Sony DVP-NS700P Operating Instructions - Page 64

To turn off the Sound Feedback function When there is no disc in the player, press and hold X on the player for more than two seconds. You will hear two beeps and the Sound Feedback function is turned off. Controlling Your TV or AV Amplifier (Receiver) with the Supplied Remote By adjusting the remote signal, you can control your TV or AV amplifier (receiver) with the supplied remote. The default signal (01) will control Sony TVs. If you connect the player to an AV amplifier (receiver), you can control the volume with the supplied remote. Notes N Depending on the units being connected, you may not be able to control your TV or AV amplifier (receiver) using some of the buttons below. N If you enter a new code number, the code number previously entered will be erased. N When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again. Controlling TVs with the remote TV/DVD Number buttons 123 456 789 0 [/1 TV/VIDEO VOL +/- 1 Slide the TV/DVD switch to TV. 2 Hold down [/1, and enter your TV's manufacturer's code (see the table below) using the number buttons. 3 Release [/1. Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. 64