Sony DVP-NS700P Operating Instructions - Page 74
Settings for the Sound (AUDIO SETUP), AUDIO SETUP
View all Sony DVP-NS700P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Settings for the Sound (AUDIO SETUP) "AUDIO SETUP" allows you to set the sound according to the playback and connection conditions. Select "AUDIO SETUP" in the Setup Display. For details on using the display, see "Using the Setup Display" (page 67). The default settings are underlined. AUDIO SETUP AUDIO ATT: OFF AUDIO DRC: STANDARD DOWNMIX: DOLBY SURROUND DIGITAL OUT: ON DOLBY DIGITAL: DTS: D-PCM OFF xAUDIO ATT (attenuation) If the playback sound is distorted, set this item to "ON." The player reduces the audio output level. This function affects the output of the following jacks: - LINE OUT (AUDIO) 1/2 jacks OFF ON Turns off the audio attenuation. Normally, select this position. Reduces the audio output level so that no sound distortion occurs. Select this when the playback sound from the speakers is distorted. xAUDIO DRC (Dynamic Range Control) (DVD only) Makes the sound clear when the volume is turned down when playing a DVD that has the AUDIO DRC function. This affects the output from the following jacks: - LINE OUT L/R (AUDIO) 1/2 jacks - DIGITAL OUT (OPTICAL or COAXIAL) jacks only when "DOLBY DIGITAL" is set to "D-PCM" (page 75). STANDARD Normally, select this position. TV MODE Makes the low sounds clear even if you turn the volume down. It is especially recommended when you listen to the sound using the speakers of the TV. WIDE RANGE Gives you the feeling of being at a live performance. When you use high quality speakers, it is even more effective. xDOWNMIX (DVD only) Switches the mixing down methods when you play a DVD on which rear signal components such as LS, RS, or S are recorded in Dolby Digital format. For details on the rear signal components, see "Changing the Sound" (page 49). This function affects the output of the following jacks: - LINE OUT L/R (AUDIO) 1/2 jacks - DIGITAL OUT (OPTICAL or COAXICAL) jacks when "DOLBY DIGITAL" is set to "D-PCM" (page 75). DOLBY SURROUND NORMAL Select this when the player is connected to an audio component that conforms to Dolby Surround (Pro Logic). The output signals which reproduce the Dolby Surround effect are downmixed to 2 channels. Select this when the player is connected to an audio component that does not conform to Dolby Surround (Pro Logic). All of the output signals are downmixed to 2 channels without the Dolby Surround (Pro Logic) effect. 74